Roof leaks after heavy rain
We trace the leak with a moisture meter and infrared camera, then repair the actual entry point, not just the wet spot. Most leak repairs are done in one visit.
Storm-rated metal roofs installed by local crews who know Florida code
Steel roofing contractors Cutler Bay FL
If you need steel roofing contractors Cutler Bay FL homeowners call after every storm, we install and repair metal roof systems built for Miami-Dade County wind and salt air. Our steel roofers in Cutler Bay handle everything from panel layout to final inspection, so your roof passes code the first time. Call (855) 960-5906 for a same-day estimate.
Fast online booking
Request service today
Tell us what is happening. Our local team will confirm your visit shortly.
Call Now (855) 960-5906 → No spam. No obligation. Just practical help.
Careful work. Honest options.
About this service
What Steel Roofing Contractors Cutler Bay FL Do
Steel roofing contractors Cutler Bay FL install standing-seam and exposed-fastener metal panels over your existing deck or new underlayment, then seal every penetration and flashing point so water never finds a path in. We measure roof pitch, check truss spacing, and set panels with a roofing nail gun or concealed clips depending on the system. Every job follows Florida Building Code and, where required, carries a Miami-Dade County NOA for wind uplift.
Cutler Bay sits in a high-velocity hurricane zone, so asphalt shingles fail early here. Salt air off Biscayne Bay eats fasteners, and summer attic temps push 140 degrees. That is why so many homeowners search for steel roofers Cutler Bay and ask about affordable steel roofing contractors Cutler Bay, Florida. A metal roof handles all three problems at once: wind, corrosion, and heat.
- ✓ Hurricane-Rated Wind Uplift
- ✓ Lower Cooling Bills
- ✓ 40-Plus Year Lifespan
- ✓ Salt-Air Corrosion Resistance
What's included
What Our Steel Roofing Service Includes
Every steel roofing project starts with a full inspection and a written scope. Here is what is included in a standard installation. Add-ons like gutter guards or attic ventilation upgrades are priced separately so you only pay for what you need.
✓
Full Roof Inspection
We walk the roof, check decking with a moisture meter, and use an infrared camera to find hidden water intrusion. You get photos and a written report before any work begins.
✓
Tear-Off and Disposal
Old shingles, underlayment, and flashing come off. We haul everything to a licensed dump and sweep your yard and driveway with a magnet for nails before we leave.
✓
Deck Repair and Underlayment
Rotted plywood gets replaced. We install new roofing felt and ice and water shield at valleys, eaves, and penetrations to create a secondary water barrier.
✓
Steel Panel Installation
We set standing-seam or exposed-fastener panels with concealed clips or screws, following the manufacturer's fastening pattern and Miami-Dade County NOA requirements for wind uplift.
✓
Flashing and Sealing
Every pipe boot, vent, valley, and ridge gets new roof flashing and roof sealant. We do not reuse old flashing, because that is where most leaks start.
✓
Permit and Final Inspection
We pull the permit, schedule the county inspection, and meet the inspector on site. You get a copy of the passed inspection and all warranty paperwork at the end.
How it works
Our Steel Roof Installation Process
01
Free Inspection
We walk your roof, check decking with a moisture meter, and photograph problem areas. You get a written scope and a flat price the same day. Most inspections take 45 to 60 minutes.
02
Panel Layout
We snap chalk lines and plan panel runs so seams fall away from prevailing wind. This step decides how your roof performs in a storm. We also confirm truss spacing meets the NOA requirements for your chosen panel.
03
Tear-Off and Deck Prep
Old shingles come off with a shingle remover, then we replace any rotted decking. We install ice and water shield at valleys and roof flashing around every pipe boot and vent. A typical tear-off takes one to two days.
04
Panel Installation
Crews set steel panels and fasten them with concealed clips or exposed fasteners, depending on the system. We use a roofing nail gun for underlayment and tin snips for custom cuts. Most homes are dried-in within three to five days.
05
Final Walkthrough
We run a water test, check every seam and fastener, and clean your gutters of metal shavings. You get a workmanship warranty and manufacturer paperwork. The final inspection with Miami-Dade County usually happens within a week.
Tools & methods
Tools and Methods We Use
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Roofing nail gun
Fastens underlayment and roofing felt quickly and consistently. We adjust depth so nails sit flush without tearing the material.
Tin snips
Cuts steel panels and flashing to exact size on site. Clean cuts mean better seals at valleys and ridges.
Chalk line
Marks panel layout lines so every run is straight. Straight panels mean fewer leaks and a roof that looks right from the street.
Moisture meter
Checks decking for hidden water damage before we install new panels. If the deck is wet, we replace it.
Infrared camera
Finds moisture behind walls and under roofing layers without tearing anything apart. We use it on every inspection.
Fall protection harness
Keeps our crew safe on steep pitches and two-story homes. Safety gear is not optional on any Cutler Bay roof.
Roofing ladder
Provides stable roof access without damaging gutters or fascia. We use ladder stabilizers on every job.
Real results
Before and after.
1980s Shingle Roof to Standing Seam
Before
A 1,800-square-foot home in Cutler Ridge had three-tab shingles installed in the 1990s. After two storms, 14 shingles were missing and the deck had soft spots near the valley. The homeowner was facing an insurance non-renewal.
After
We tore off the old roof, replaced 6 sheets of rotted plywood, and installed a 24-gauge standing-seam steel roof with Kynar 500 coating. The final inspection passed on the first visit. The homeowner's insurance renewed without a fight.
Storm-Damaged Roof Secured and Replaced
Before
A tropical storm peeled back 30 feet of shingle roofing on a Lake Forest home. Rain was entering the attic and soaking insulation. The family was using buckets to catch drips in two bedrooms.
After
We tarped the roof within 18 hours, documented the damage for insurance, and installed a new steel panel system nine days later. The claim covered $22,000 of the $26,000 project. No leaks since.
Commercial Flat Roof Leak Fixed
Before
A 6,000-square-foot warehouse in Cutler Ridge had ponding water on a flat roof and recurring leaks over the loading dock. Tenants were complaining about water damage to stored goods.
After
We repaired the drainage slope, resealed the membrane, and installed a tapered steel panel system over the worst section. Ponding stopped, and the leaks have not returned through two rainy seasons.
Problems we solve
Steel Roofing Problems We Solve in Cutler Bay
Most roof calls we get in Cutler Bay come down to five issues. Here is what they look like, what happens if you ignore them, and how we fix them.
Ask a pro →↗
Missing shingles and wind uplift damage
We replace missing shingles and check the full roof for uplift damage. If the roof is too far gone, we quote a steel roof replacement that will not blow off next season.
Flashing failure around vents and chimneys
We replace every pipe boot and flashing point during installation. On repairs, we reseal or replace the failed flashing and water-test it before we leave.
Clogged gutters and ponding water
We clear gutters, check drainage slope, and repair ponding areas on flat roofs. For steel roofs, we add gutter guards if you want to stop the problem permanently.
Proof you can check
Licensed, Insured, and Local
✓
Florida Roofing License (RR)Florida Department of Business and Professional Regulation
✓
Miami-Dade County Registered ContractorMiami-Dade County Building Department
✓
OSHA 10 and OSHA 30 Safety CertifiedOccupational Safety and Health Administration
✓
GAF Master Elite and Owens Corning Preferred Contractor StandardsGAF and Owens Corning manufacturer programs
Most residential steel roof installations in Cutler Bay run $18,000 to $38,000 in 2026, depending on roof size, pitch, and panel type. A basic repair like flashing or fastener replacement starts around $450. We give you a flat written price after the inspection, so there are no surprise change orders mid-job.
We remove old roofing, repair decking, install underlayment and ice and water shield, then set steel panels and seal every penetration. We also handle permit paperwork, Miami-Dade County NOA compliance, and final inspection. Think of us as the crew that takes your roof from torn-up deck to code-passed metal system.
Check three things: a Florida Roofing License (RR), proof of insurance, and at least one local metal roof you can drive past. Ask whether they pull the permit and who handles the final inspection. We provide all of that upfront and can show you completed roofs in Cutler Bay neighborhoods.
Yes. Zyntix Forge Works holds a Florida Roofing License (RR) and is registered with Miami-Dade County. We carry general liability and workers compensation insurance. You can verify our license through the state DBPR database before any work begins. We encourage you to check.
More services
Related Roofing Services in Cutler Bay
Roofing contractor near meIf you are searching for a roofing contractor near me in Cutler Bay, we handle full-service roof work beyond steel. Same crew, same standards, whether it is a repair or a complete replacement.Explore →
24/7 roofing serviceStorm damage does not wait for business hours. Our 24/7 roofing service covers emergency tarping and leak control across Cutler Bay, so your home stays dry until we can make permanent repairs.Explore →
Local roofing contractorAs a local roofing contractor based in Cutler Bay, we know the inspectors, the permit office, and the wind-code requirements. That local knowledge speeds up every steel roofing project we run.Explore →
Emergency roofing serviceWhen a tree limb punches through your deck or a storm peels back panels, our emergency roofing service responds fast. We secure the roof, document damage for insurance, and schedule permanent repairs.Explore →
Roof repairNot every steel roof needs replacement. We repair flashing, replace cracked pipe boots, reseal seams, and swap damaged panels. Most steel roof repairs in Cutler Bay are done in a single day.Explore →
Roof ReplacementWhen repairs stop making sense, we handle full roof replacement from tear-off to final inspection. We walk you through panel options, colors, and warranty coverage before anything starts.Explore →
Roof InstallationNew construction or a first-time roof? Our roof installation crews set underlayment, flashing, and steel panels to Florida Building Code. We coordinate with your builder and the county inspector.Explore →
Roof MaintenenceTwice-a-year maintenance keeps a steel roof performing. We clear gutters, check fasteners, inspect sealant, and photograph everything. Cutler Bay salt air makes this especially important near the bay.Explore → Ready when you are
Get Your Steel Roof Estimate in Cutler Bay FL
We give same-day estimates and honest pricing on every steel roofing project. Call (855) 960-5906 and we will inspect your roof, answer your questions, and put a written price in your hands today.
Get Free Estimate (855) 960-5906 →
Request an appointment
Contact our Cutler Bay roofers
Call (855) 960-5906 any time, day or night, and a real person picks up. For non-emergencies, we schedule free inspections Monday through Friday and can usually get to your property within 24 to 48 hours. If you have photos of the damage, text or email them over and we will take a look before we arrive.
Call anytime(855) 960-5906Email the officeinfo@cutlerbayflroofingcontractor.shop
Office hoursOpen 24 hours · 7 days a week